ATI AR-15 Strikeforce Stock
Lewis Creek Shooting School 11.02.12
For several years, I’ve been using the ATI adjustable Akita shotgun stock. Looking like a regular stock with an elevated cheek-piece, the Akita is adjustable for length of pull and comb height and works really well on my youth trainer Remington 870.
I’ve really gotten into AR-15s in the last couple of years, though, and I recently decided to try their Strikeforce M4-type adjustable stock. At first glance, the Strikeforce looks like almost every other M4 stock, but closer inspection reveals a couple of refinements. First, there is an adjustable cheek piece that allows the shooter to tune the stock for proper stock weld with higher-placed optics. This can be a real issue for getting on the sight really quickly and the adjustment is simple and reliable using four Phillips screws that grip the stock to the grooved surfaces. There are four height settings with movement of about a half inch. If the shooter wants a lower position, the elevator can be removed completely for another quarter inch.
Installation is simple and covered completely in the four-page instruction sheet that comes with every stock. There are six different-length detents, giving a length of pull from a minimum of 10.75” to 14.5”. There is also a removable butt pad that provides a tacky surface for the shoulder and some softening of recoil. A QD swivel stud graces the very rear of the stock.
I found the stock both comfortable to use and appreciated the adjustable cheek piece and additional length. I find the normal M4 stock a little short for scoped use in the prone position and the extra length was enough to make things more comfortable. Mounting the scope further forward helps with this, but requires a forward mount and then the eye relief is too long for standing. The extra length on the Strikeforce handled this problem nicely.