3 Ways to Theft-Proof Your Scouting Cameras

   02.18.16

3 Ways to Theft-Proof Your Scouting Cameras

The sick feeling in the pit of my stomach turned into anger as I stood there looking at the tree my scouting camera had been attached to the previous day. I hate losing a trail camera to a thief, but trail cameras can be replaced. What really made me angry was losing the information contained on the SD card. I was hundreds of miles from home on a DIY deer hunting trip.

The cameras I put out were a huge part of my decision-making process regarding where I would hang my stands and hunt. I had just lost an entire 24 hours of information about the deer in this area. That really hurts.

I run a lot of scouting cameras, it’s almost like a sport in itself for me. I use them not only for deer hunting, but for bear hunting, property surveillance, wildlife viewing, even predator monitoring and control. I put them in areas where I don’t expect anyone to every find one, and at times I put them in areas where I figure others will see them and hope they leave them alone. Still, the number of cameras I have had stolen over the years could be counted on my fingers. However, I have begun to take some precautions to avoid losing them to thieves. Here are three ways to minimize your losses.

Go Covert

One of the easiest ways to cut losses is to simply use cameras that are harder to see and hide them better. There are three primary kinds of flashes for night photos, white flash, infrared and black flash. Black flash cameras do not have a flash that is visible to the eye. Both white flash and IR cameras have lights that can be seen by anyone who happens to be looking the right direction when they take a photo.

Larger cameras are easier to spot than smaller ones. Many companies are making very small camera bodies that are not much bigger than your hand. Small black flash cameras are difficult to detect, but I go one step farther. I will use a small bungee cord to secure a leafy branch over the camera, just leaving enough opening for the sensor, the lens and the flash. They become difficult to see unless someone is actively searching for them.

Put Them Out of Reach

Putting your camera out of reach is one effective way to make it difficult for potential thieves to find it and even more difficult for them to steal it if they do find it.
Putting your camera out of reach is one effective way to make it difficult for potential thieves to find it and even more difficult for them to steal it if they do find it.

One of the most effective ways to thwart thieves is to put the camera up where they cannot reach it. I like to hang the camera at least ten feet off the ground and point it downward to monitor the area. Some people might be able to shinny ten feet up into a tree to get the camera, but most won’t.

There are several companies that make mounts for cameras that work in this way. The two I have used are the Covert Tree-60 and the Stic-N-Pic.

Here’s how I go about it. I carry a climbing stick to the location I want to put the camera. Just one. I can strap the climbing stick to the tree, climb up it, and reach at least ten feet off the ground to mount my camera. When I am done, I just take the stick out with me. It’s not a totally fool proof way to get the camera out of reach, but it works.

Here’s a video showing how I do this:

Putting cameras up high comes with another advantage: deer do not seemed to notice the flash at all. I have seen some deer become alarmed by a white flash at eye level, but I have never seen a case where a deer reacted in a negative way to a flash ten feet up.

Lock Them Up

Covert’s Bear Safe allows you to protect your camera with a steel box that makes it very difficult for thieves to steal it.
Covert’s Bear Safe allows you to protect your camera with a steel box that makes it very difficult for thieves to steal it.

Most camera companies are now making lock boxes for their cameras. This was at first a response to the fact that bears like to chew on scouting cameras, but it works equally well to discourage the camera thief. These steel boxes can be bolted to a tree and then the camera is locked securely inside the box. Here’s a video of how I use these at bear baits:

The disadvantages of this strategy include the extra weight of carrying the steel boxes with you, and the extra tools needed to fasten it to the tree. I have a separate backpack that I use which contains these boxes, lag bolts, padlocks and a cordless screwdriver with a socket. (Be aware: Putting a screw in a tree on public land is not legal in some states, so it is your responsibility to know the laws.)

I use the cordless screwdriver to fasten the box to the tree with lag screws, insert the camera and then lock it up. It’s really not that much extra work and this makes it very difficult for any would-be thief to make off with your camera unless the creep returns with a saw and cuts down the tree.

With a little extra effort, you can protect your cameras from thieves and get the photos you desire. Each of these three methods has its time and place.

 

Follow Bernie’s bowhunting adventures on his blog, bowhuntingroad.com.

Avatar Author ID 559 - 594702183

Bernie Barringer is a full-time outdoor writer and author of 11 books on hunting, fishing, and trapping. He travels North America each year hunting big and small game and fishing and blogs about it on his website www.bernieoutdoors.com. He is best known as a traveling "freelance hunter" with a bow. He has taken whitetails and bears with a bow and arrow in more than a dozen states and provinces. Bernie is a great resource for information that will make the traveling hunter more successful and he posts tips and articles on his website that help freelance traveling hunters be more successful.

Read More